DC12V 60W High Pressure Auto Reverse Osmosis Booster Pump for Water Purifier
This Model Technical Data as Follows
Match Power Adapter Reference: Output 12V,5A(6A) Power Adapter
Working Pressure: 0.6-0.8Mpa=6-8Bar=87-116PSI
Flow (MAX): 5L/min
Inlet and Outlet Connect Hose Size: 1/4''(6mm)
Max. Suction Head: 2m
Lift Head: 35m
Noise Level: 55-60dB
Motor Lifespan: 3-5years
Net Weight: About 0.72Kg
Size: Approx. 160 x 97 x 60mm (L*W*H)
12V,60W Reverse Osmosis Booster Pump x 1pc
Gift For Free: 2pcs=1pair Elbow 3/8"--1/4'' Quick Fitting
Showing on High Pressure Auto Reverse Osmosis Booster Pump
Application of micro diaphragm pump
Miniature Diaphragm Handling Precautions
Do not use the temperature exceeds 70 degrees celsius high temperature water or dirty water.
Motors can splash a little water (dry after use), not directly in front of the motor pump spray, non-motor pump in the water.
Motor pump not long in damp places.
Do not disassemble the machine or adjust the pressure setting screw.
Before use, make sure the power parameters and motor pump input parameters match.
Recommended outlet inside diameter of not less than 5.5mm, the length should not exceed 10m (can not be too long or too thin, or off the gun flow and pressure effects).
Proposed inlet pipe inner diameter of not less than 6mm, draw water from the time should not exceed 1.5mm.
When connected to water and other pressure water supply, can properly plus hose's length, but water pressure not bigger than 0.2Mpa.
Please be repaired or replaced by professionals when 9 power cord is damaged.
When using battery power, the need to guard against battery power loss.
long-term need or disconnect the power supply when the pump motor suspended
Welcome to Contact Us for OEM Large Quantity!